34.59 X 2.62 PTFE

 

---

PTFE Oring

PTFE

Shore A Description:

The hardness of rubber compounds is measured by the Shore A durometer; the higher the durometer, the harder the compound. Softer compounds stretch easier and seal better on rough surfaces. Harder compounds offer greater abrasion resistance and resistance to extrusion.

60 Shore A is softer than 70

70 Shore A is the standard

90 Short A is very stiff

Specs:

PTFE exhibits some unique properties when used in O-Ring sealing systems, the most well known is its impervious nature to virtually all fluids and gasses from -100°F to 450°F. Only molten alkaline metals and certain halogenated compounds will degrade its integrity.

Material:

PTFE

Standard Service Temperature: -110°F - +450F

Application:

PTFE material has almost universal chemical compatibility. One of the best solutions for low-pressure systems.

---