- Two Piece Seals>
- Bronze Filled (46)>
- Bronze O.D. Sealing>
- S55014-0100-46K / -009
GL 10 X 5.1 X 2.2.
S55014-0100-46K / -009
UPC Code: 26026387
- Quantity Available: 100+
- Availability: In stock
The sealing performance of the stepseal results from the hydrodynamic properties of the seal. The seal edge creates a steep contact pressure gradient on the high pressure side and a shallow contact pressure gradient on the low pressure side. The controlled pressure gradients minimizes fluid adherence and enables residual fluid to be returned into the system. The O-Ring relief chamfer reduces pressure loading on the seal, whereby contact and sealing performance is improved at high service pressures. The special high-lift rear chamfer combines a smooth downstream sealing face with the ability to meet large radial clearances and hardware tolerances.
Advantages of Stepseal:
High static and dynamic sealing effect.
High extrusion resistance, meets high hardware clearances.
Low friction, high efficiency.
Stick-slip free starting, no sticking.
High abrasion resistance, high operational reliability.
Wide range of application temperatures and high resistance to chemicals depending on material.
Injection molding machines
Material: Bronze (T46)
Used as a standard material for hydraulics, it offers high compressive strength, good sliding and wear properties, and good extrusion resistance. Typically a greyish to dark brown color.